RFID hardware built for every scale of operation

RFID Inlay Quanray Qstar 7U

Dry & wet formats · 14 variants

35x17mm · 40x20mm · 42x16mm · 49x11mm · 50x30mm · 75x15mm · 95x8mm

RFID Inlay NXP UCODE 9

Dry & wet formats · 6 variants

50x30mm · 75x15mm · 95x8mm

RFID Sticker Label Quanray Qstar 7U

Ready-to-apply label · 43 variants

35x17mm · 40x20mm · 42x16mm · 49x11mm · 50x30mm · 75x15mm · 95x8mm

RFID Sticker Label NXP UCODE 9

Ready-to-apply label · 8 variants

50x30mm · 75x15mm · 95x8mm

RFID Slim CP12025

RFID Slim CP12025 is an elongated, low-profile UHF RFID panel antenna covering 0.902-0.928 GHz in a 1218x258x12.5 mm acrylic enclosure. A 14.8 dBic maximum gain and LHCP/RHCP circular polarization with a typical 1.5 dB axial ratio help it read tags in varied orientations. VSWR of ≤ 1.2, 10 W power handling and an SMA Female connector suit warehouse, retail inventory, asset tracking, library and access control installations.

14.8 dBic · 0.902-0.928 GHz

Starting at ¥1,580

RFID Slim LP12040

The RFID Slim LP12040 is a 12.5 mm thin UHF RFID panel antenna covering 0.902-0.928 GHz with 17 dBi typical gain and linear polarization. Its elongated 1218x428x12.5 mm acrylic-covered body gives a narrow 13° x 37° beam with a front to back ratio above 20 dB, suited to installations where tag orientation is fixed. An SMA Female connector and 10 W maximum power suit warehouse, retail inventory, asset tracking and access control installations.

17 dBi · 0.902-0.928 GHz

Starting at ¥1,980

RFID Slim CP12048

RFID Slim CP12048 is a wide-format, low-profile UHF RFID panel antenna covering 0.902-0.928 GHz in a 1218x488x12.5 mm ABS enclosure. It delivers 17 dBic maximum gain with LHCP/RHCP circular polarization and a typical 1.5 dB axial ratio, helping it read tags in varied orientations. VSWR of ≤ 1.5, 10 W power handling and an SMA Female connector suit warehouse, retail inventory, asset tracking, library and access control installations.

17 dBic · 0.902-0.928 GHz

Starting at ¥1,980

RFID Slim LP6012

RFID Slim LP6012 is a low-profile UHF RFID panel antenna covering 0.902-0.928 GHz in a 600x120x12.5 mm ABS enclosure. It provides 10 dBic typical gain with linear polarization, VSWR of ≤ 1.7 and 10 W power handling. An SMA Female connector links it to RFID readers for warehouse, retail inventory, asset tracking, library and access control installations.

10 dBic · 0.902-0.928 GHz

Starting at ¥871

RFID Slim Low Sidelobe CP6226

The RFID Slim Low Sidelobe CP6226 is a 13 mm thin UHF RFID panel antenna covering 0.902-0.928 GHz with 12 dBic typical gain. Its low sidelobe level (< -15 dB) keeps energy focused in the main beam, while RHCP circular polarization with a 1.5 dB typical axial ratio tolerates varied tag orientation. A 620x260x13 mm ABS-covered body with SMA Female connector suits warehouse, retail inventory, library and access control installations.

12 dBic · 0.902-0.928 GHz

Starting at ¥850

RFID Slim CP6226

The RFID Slim CP6226 is an 11 mm thin UHF RFID panel antenna covering 0.902-0.928 GHz with 12 dBic typical gain. It keeps a good sidelobe level while holding the axial ratio low (1.5 dB typical) across the entire US band, and its RHCP circular polarization tolerates varied tag orientation. A 620x260x11 mm acrylic-covered body with SMA Female connector and 10 W maximum power suits warehouse, retail inventory, asset tracking and access control installations.

12 dBic · 0.902-0.928 GHz

Starting at ¥850

RFID Slim CP2525

RFID Slim CP2525 is a compact, low-profile UHF RFID panel antenna covering 0.902-0.928 GHz in a 258x258x14.5 mm ABS enclosure. It provides 9.0 dBic typical gain with RHCP circular polarization and a 1.5 dB axial ratio, helping it read tags in varied orientations. VSWR of ≤ 1.1, 10 W power handling and an SMA Female connector suit warehouse, retail inventory, asset tracking, library and access control installations.

9.0 dBic · 0.902-0.928 GHz

Starting at ¥950

RFID Slim CP6060

The RFID Slim CP6060 is a 12.5 mm thin UHF RFID panel antenna covering 0.9-0.93 GHz with 15 dBic typical gain. LHCP/RHCP circular polarization with a 1.5 dB typical axial ratio tolerates varied tag orientation. Its 608x608x12.5 mm ABS-covered body, SMA Female connector and 10 W maximum power suit warehouse, retail inventory, asset tracking and access control installations.

15 dBic · 0.9-0.93 GHz

Starting at ¥1,350

RFID Slim Near Field A3020

The RFID Slim Near Field A3020 is a 12 mm thin near-field UHF RFID antenna for the universal 860-960 MHz band. A -2 dBi peak gain keeps the read zone close to the antenna surface — tags are read within about 150 mm, while tags as close as 100 mm away are rejected — and VSWR stays below 1.3:1 across the full band. It reads tags on metals and liquids and through most packaging. The 300x200x12 mm body (plastic top, aluminium bottom) with SMA Female connector weighs 500 g and handles up to 2 W (33 dBm).

-2 dBi · 860-960 MHz

Starting at ¥634

RFID-Bookshelf Antenna

The RFID-Bookshelf Antenna is a compact 168x140x9 mm UHF RFID antenna covering 0.89-0.94 GHz with 3 dBic gain, sized for shelf-level reading. LHCP/RHCP circular polarization with an axial ratio below 3 dB tolerates varied tag orientation, and a front to back ratio above 10 dB limits reads from behind the antenna. An ABS cover and SMA Female connector suit library, retail inventory and asset tracking installations.

3 dBic · 0.89-0.94 GHz

Starting at ¥598

RFID Rugged Antenna CP1414

RA-WC-NFF-141401 is a compact, rugged UHF RFID antenna offered for the 865 - 868 MHz (EU) or 902 - 928 MHz (US) band, with 5 dBic maximum gain and circular polarization. A 106° beamwidth across both XZ and YZ planes produces a wide, even read field, and the IP67-rated aluminum and acrylic enclosure stands up to demanding environments. Designed for inventory, asset tracking, access control, vehicle ID, healthcare and smart shelves where stability and reliable coverage matter.

865 - 868 MHz (option 1) or 902 - 928 MHz (option 2) · 5 dBic

RFID Rugged Antenna CP2424 IP67

RA-UC-NFF-242401 is a high-performance UHF RFID antenna for the 902 - 928 MHz US band with 9.0 dBic nominal gain. A rugged IP67-rated enclosure pairs an aluminum and acrylic shell with an integrated PCB antenna in a 20 mm ultra-slim profile, delivering stable RF and reliable data communication for dock doors, portals and outdoor gates. Suited to inventory, asset tracking, access control, vehicle ID, healthcare and smart-shelf deployments where uptime and weather sealing matter.

902 - 928 MHz · 9.0 dBic

NR155 Fixed IoT UHF RFID Reader

NR155 delivers high sensitivity and stable multi tag performance in a small industrial form factor. With adjustable output power up to 30 dBm, -85 dBm max. sensitivity, support for ISO/IEC 18000-6C (EPC Gen2), and a read rate of up to 400 tags per second, it is built for smart retail, desktop workstations, automation cells, and edge level RFID systems. MQTT / MQTTS with JSON payloads, Ethernet, RS232, USB and OTA firmware upgrades simplify integration.

4 x RP-TNC Ports · Up to 400 tags/second

Starting at ¥2,740

RFID Dual Near-field Reader with Antenna Integrated

Dual near-field reader with antenna integrated into a single 258 x 258 x 15 mm slim cover. Tuned for the 866 - 928 MHz UHF range with a 50 cm controlled read zone, ideal for POS, document, jewellery and item-level verification where a contained read field matters more than long-range coverage.

866 - 928 MHz · Up to 50 cm (tag-dependent)

RFID Small Near-Field Reader

Compact short-range UHF RFID reader in a 155 x 155 x 24 mm aluminum and ABS housing. Operates at 866 - 928 MHz with EPC Class 1 Gen 2 (ISO 18000-6C) support and configurable output up to 33 dBm in 1 dBm steps. USB Type-C connectivity makes it easy to deploy on a desktop or mount on a wall or shelf for retail checkout, workforce management and access control.

Max 33 dBm, configurable in 1 dBm steps · 866 - 928 MHz

RFID Security Bar Scanner

Handheld UHF RFID wand built for security checks, asset audits and crowd-flow verification. A 380 mm linear bar antenna delivers a focused, directional read zone, while the integrated 1.3 inch OLED shows tag count, EPC and battery state at a glance. Trigger-driven scanning, Bluetooth 5.0 pairing and an 8-hour Li-ion battery keep the device ready for full-shift use at gates, doors, archives and inventory rooms.

866 - 928 MHz · EPC Class 1 Gen 2 (ISO 18000-6C)

RFID Handheld Single-Hand Reader

Single-hand handheld UHF RFID reader built around a 6 dBic circular-polarization panel antenna, tuned to the 902 - 928 MHz US band. Bluetooth 5.0 pairs the reader with phones, tablets and host PCs in seconds, while the mechanical trigger and 5200 mAh Li-ion battery keep teams moving through inventory counts, dock checks, asset audits and receiving sweeps for a full shift.

Up to 700 tags/second · Max 30 dBm, configurable in 1 dBm steps

SPFT RF SWITCH

The SPFT RF Switch is an SP4T, 50 Ω RF switch covering 100 - 3000 MHz with 0.5 dB insertion loss and ≤ -25 dB isolation. It handles up to +40 dBm, with a +39 dBm 0.1 dB compression point and a typical 30 ms transit time. Powered at +5V over USB Type C or +9V via DC jack, it sits in a 57.7x75.6x15.5 mm aluminum housing rated for -55 °C to 100 °C.

100 - 3000 MHz · SP4T

Starting at ¥713

Self-checkout Kiosk

Transform functionality retail operations with our intelligent Self-checkout Kiosk. Combining loss prevention with seamless customer experience, this solution features automated RFID scanning that instantly verifies potential skipped items, reducing shrinkage while speeding up the checkout process by 40%.

Hardware · Automated RFID scanning

Starting at ¥11,500

Omni-Marine Antenna BC-103

Omni-Marine Antenna BC-103 is a compact omnidirectional marine antenna covering the 0.617-0.96, 1.427-1.517, 1.71-2.7 and 3.4-3.8 GHz bands. It provides 3.5 dBi peak gain with linear polarization, a SISO configuration, VSWR below 2.2 and up to 10 W input power. The 158 mm ABS body and SMA Female connector suit maritime communication, vessel tracking, offshore operations and marine navigation.

3.5 · 0.617-0.96 / 1.427-1.517 / 1.71-2.7 / 3.4-3.8

Omni-Marine Antenna BC-206

Omni-Marine Antenna BC-206 is an omnidirectional marine antenna covering the 0.617-0.96, 1.427-1.517, 1.71-2.7 and 3.4-3.8 GHz bands. It delivers 6.5 dBi peak gain with linear polarization and VSWR below 2, in a MIMO configuration. The 346 mm ABS body and SMA Female connector suit maritime communication, vessel tracking, offshore operations and marine navigation.

6.5 · 0.617-0.96 / 1.427-1.517 / 1.71-2.7 / 3.4-3.8

Omni-Marine Bamboo Antenna PVC

The Omni-Marine Bamboo Antenna PVC is an omnidirectional marine antenna covering the 0.694-0.960, 1.710-2.170, 2.300-2.690 and 2.400-2.484 GHz bands in a 950 mm PVC body. It provides up to 4.0 dBi peak gain (1.710-2.170 GHz) with linear polarization in a MIMO configuration, with VSWR from below 2.1 to below 3.2 depending on band. An SMA Female connector supports maritime communication, vessel tracking, offshore operations and marine navigation.

2.0 / 4.0 / 2.5 / 3 (per band) · 0.694-0.960 / 1.710-2.170 / 2.300-2.690 / 2.400-2.484

Omni-Marine Bamboo Antenna ASA

The Omni-Marine Bamboo Antenna ASA (MO-PA-201) is an omnidirectional marine antenna covering the 0.694-0.960, 1.710-2.170, 2.300-2.690 and 2.400-2.484 GHz bands in an ABS cover. It provides up to 4.0 dBi peak gain (1.710-2.170 GHz) with linear polarization in a MIMO configuration, with VSWR from below 2.1 to below 3.2 depending on band. An SMA Female connector supports maritime communication, vessel tracking, offshore operations and marine navigation.

2.0 / 4.0 / 2.5 / 3 (per band) · 0.694-0.960 / 1.710-2.170 / 2.300-2.690 / 2.400-2.484

NEXTWAVES OCEAN 1

Outdoor marine Wi-Fi transceiver for vessel, pier, and coastal connectivity.

2.4 / 5.8 · 802.11 b/g/n/ac

NEXTWAVES OCEAN 2

High-gain marine Wi-Fi transceiver for longer outdoor links and vessel connectivity.

2.4 / 5.8 · 802.11 b/g/n/ac

NEXTWAVES SEA 1

Compact marine Wi-Fi transceiver for cabin, deck, and protected installation zones.

2.4 / 5.8 · 802.11 b/g/n

NEXTWAVES SEA 2

Outdoor marine Wi-Fi transceiver kit for compact vessel and marina deployments.

2.4 / 5.8 · 802.11 b/g/n/ac

Rectangular Waveguide Interface Aperture

The Rectangular Waveguide Interface Aperture is a WR284 waveguide antenna covering 2.60-3.95 GHz with 15 dBi gain. A VSWR below 1.25, CPRG flange and N Type Female connector make it suited to RF testing and measurement, antenna calibration and R&D setups. It measures 232x170x270 mm.

2.60-3.95 · 15

Coaxial to Rectangular Waveguide Adapter

This coaxial to rectangular waveguide adapter interfaces an N Type Female coaxial connector with WR340 (EIA) waveguide across 2.20-3.30 GHz. It maintains VSWR below 1.25 and uses a CPRG flange, with overall dimensions of 318x249x390 mm (WxHxL). It is intended for RF testing and measurement, antenna calibration, and research and development.

2.20-3.30 · 15

Waveguide Horn Antenna

The Waveguide Horn Antenna is a WR975 horn covering 0.75-1.15 GHz with 10 dBi gain. A VSWR below 1.25, CPRG flange and N Type Female connector suit RF testing and measurement, antenna calibration and R&D work. It measures 450x320x665 mm.

10 · 0.75-1.15

Direction Finding

The Direction Finding antenna is a DF interferometer for 2-channel or 5-channel receivers. It covers two DF bands, 300 - 1000 MHz and 1000 - 3000 MHz, alongside a 30 - 6000 MHz reference antenna. Vertical polarization and a 50 Ω nominal input impedance simplify integration with standard receiver chains.

300 - 1000 MHz · Vertical

BTS 4G Antenna - Highband

BTS 4G Antenna - Highband is a base station sector antenna covering 1710 - 2690 MHz for 4G/LTE networks. It provides 16.2 - 16.8 dBi gain with dual ± 45° polarization, a 65° horizontal beamwidth and a 6.4° vertical beamwidth. Adjustable electrical downtilt from 0° to 10° helps tune coverage for telecommunications and signal coverage extension.

16.2 - 16.8 dBi · 1710 - 2690 MHz

BTS 4G Antenna - Lowband

The BTS 4G Antenna - Lowband is a base station panel antenna covering 698 - 960 MHz with 13.2 - 13.8 dBi gain. Dual ±45° polarization, an adjustable 0° - 10° electrical downtilt via a replaceable internal RET and 0° - 20° mechanical downtilt let operators shape coverage per sector. A 67° horizontal and 15° vertical beamwidth suit 4G/LTE base stations, with six 4.3-10 Female connectors and an ASA+PC UV-resistant radome on a 350 x 1380 x 150 mm body.

13.2 - 13.8 dBi · 698 - 960 MHz